WOBKEY’s 75% mechanical keyboard, the Rainy75 V2, has launched its crowdfunding campaign on Kickstarter.
For Japan, KIBU says it plans to launch a crowdfunding campaign on Makuake around late November 2026.
It has also said it will offer a Japanese JIS layout making this an announcement of interest to those considering buying one in Japan.
In response to comments that Japan was not listed as a shipping destination on Kickstarter, KIBU has announced plans for a domestic release.

Recommended
Makuake launch in Japan planned for around late November
In an official post on X on November 17, KIBU announced the planned Makuake launch timing and the Japanese layout.
The post available at the time of writing did not specify an exact launch date, domestic pricing, shipping schedule, or color and switch options.
Rather than assuming Kickstarter’s listed prices and shipping schedule will also apply in Japan, it would be best to check KIBU’s announcement for the Japanese market.
What’s changed from V1?
The Rainy75 drew attention as an affordable model offering an aluminum case and a typing sound likened to the sound of rain.
Greenkeys has reviewed each model.
Rainy75 Series Review Roundup
The V2 carries on that approach while also improving wireless performance, battery capacity, and ease of disassembly and adjustment.
The table below compares the original mechanical-switch model with the V2 specifications published on Kickstarter.
| Feature | Original Rainy75 (V1) | Rainy75 V2 |
|---|---|---|
| Battery | Lite/Color: 3,500mAh; Pro: 7,000mAh | 10,000mAh |
| Polling rate | Up to 1,000Hz | Up to 8,000Hz wired and over 2.4GHz wireless |
| Opening the case | Secured with internal screws | Tool-free ball-catch mechanism |
| Power switch | Under the keycap near Caps Lock | Operable from outside the case |
| Sound-dampening layers | 5 layers | 6 layers |
| Gasket | Supported by cylindrical rubber pieces | 3 options with different feels |
| Upper-right controls | Mechanical switches | Keys / included knob / optional display module |
| Rear | Design with a weight | Magnetically attached rear panel |
The original came in different versions, including Lite, Color, and Pro, so the table above does not cover every variant.
The V2’s configuration and included accessories for Japan will also need to be confirmed when the Makuake project goes live.
KawamuraThe Japanese JIS layout is especially worth watching.
Tool-free top-case disassembly makes typing feel easier to adjust
To open the original case, you had to access the screws beneath the switches.
The V2 has a tool-free opening design, and KIBU says it will offer 3 gasket options: soft, medium, and firm.
The ability to adjust the typing feel not only by swapping switches but also by changing how the case is supported looks like a major difference from the original.
Moving the power switch to the outside should also make the keyboard easier to use day to day.
KawamuraPreviously, the wireless on/off switch was on the switch plate beneath the Caps Lock keycap, making it quite inconvenient to access. This is a welcome update.

The top-right area can be switched from keys to a knob or display
In addition to the standard two-key configuration, the V2 lets you swap in the included knob in the top-right corner.
A separate module combining a color LCD, a dot-matrix display, and a knob is also available as an optional extra.
The display module is not included as standard, so even if it appears in product images, it is not part of every purchase configuration.
The company says knob controls and other assignments can be changed using its dedicated web-based configuration tool, WOBKEY Studio.
Performance updates include a 10,000mAh battery and 8K wireless polling
The battery capacity has increased to 10,000mAh, and the keyboard is said to support polling rates of up to 8,000Hz over both wired and 2.4GHz wireless connections.
The front height is listed as 17.4mm and the typing angle as 8.5 degrees, and the height at the front has been revised along with the overall appearance.
If you want a Japanese layout, watch for updates on the Japan release
The V2 is more than a performance upgrade: it also brings changes to how you open the case, adjust the typing feel, and swap out the controls in the top-right corner.
For those who liked the original’s typing sound, it will also be interesting to see how the new structure affects the typing feel.
Read our hands-on review of the original Rainy75
The original was also offered with a Japanese layout, and it has now been confirmed for the V2 in Japan as well.
If you’re considering buying in Japan, ahead of the Makuake launch planned for around the end of November, it is worth waiting for KIBU’s official announcement.
Greenkeys will follow further developments.
- First published:
- Last updated:
- Reporting method: Official announcements, official social media, and publicly available images
- Sources and references
- Conflict of interest: The original Rainy75 was provided by KIBU for review; no product was provided for the V2; no monetized links in this article
Google検索の「優先ソース」にGreenkeysを追加します
Add Greenkeys as a Preferred Source on Google
