How Have Keychron’s Magnetic Switches Changed? A Look at Compatibility and Hopes for a Common Standard

  • Copied the URL !
Column
About This Article
This column includes the author’s analysis and perspective on keyboard products, market developments, and related topics. While every effort is made to verify factual information, the analysis and evaluation reflect the author’s point of view. It should be read as opinion-based editorial content rather than a product review or news report.

This is a column.

Keychron’s newly adopted switch standard, “Keychron Apex POM low-profile switches,” has sparked considerable discussion on social media over its compatibility.

Cherry MX-compatible switches have been the norm for standard-profile keyboards. But low-profile mechanical switches, which came later, have seen a proliferation of competing standards. So even when a new switch is fully compatible with the Cherry MX footprint, it’s natural for some people to feel that yet another standard has been added.

That is how wary the low-profile mechanical switch community has become of new standards.

I hope these standards won’t proliferate, but instead converge in a way that leaves users with fewer doubts.

I believe Keychron will take care to make this a first step toward that goal.

Having a proprietary standard can benefit a brand and give it control.

At the same time, given the company’s emphasis on open source, might it also help the standard gain wider adoption by making it available to other makers?


In fact, this isn’t the first time Keychron has faced a standards issue.

There is evidence that Keychron has revised the specifications of its magnetic keyboards in response to the market, even though they previously supported only a limited range of switches.

In practice, support for third-party switches has expanded on models with Lime, and Keychron also changed the magnet orientation of the original Nebula in V2.

First, I’ll summarize the switch differences and keyboard compatibility that can be confirmed from publicly available information.

Table of Contents

Magnetic switches with different magnet polarities coexist

I’m not particularly knowledgeable about gaming, but I’ve followed the issue of magnet polarity in magnetic switches.

Since magnetic switches began to gain popularity, products with different magnet orientations have coexisted on the market.

Looking at the magnet orientation, one type has its north pole facing down, while the other has it facing up.

With different magnet polarities, a keyboard may fail to detect input correctly, even if the switches have the same external shape.

In Gateron’s lineup, the KS-20 series has its north pole facing down, while the KS-37 series has it facing up. Products with the north pole facing down, such as the KS-20 series, now appear to be the mainstream.

Keychron, which releases magnetic keyboards, has also used Gateron’s “Nebula” switches.

In fact, Nebula V1 belongs to the KS-37 series and is not part of today’s mainstream.

Keychron took this into account and changed the specifications.

Differences Between Nebula V1, V2, and Lime

SwitchNorth Pole OrientationBasis for Confirmation
Gateron Nebula V1UpwardStated by Keychron Korea’s official site
Gateron Nebula V2Downward (toward the PCB)Stated by Keychron Korea’s official site
Keychron Ultra-Fast LimeCan be inferred to face downwardInferred from official compatibility information for keyboards using the switch

Keychron Korea’s official site explains that Nebula V1’s polarity was the opposite of that found in many products on the market, and that V2 changed the orientation to improve compatibility.

Lime is another switch that Keychron describes as designed in-house.

We have not confirmed whether they correspond to Gateron’s KS-20 or KS-37 models, but based on the product information below, they appear to have the north pole facing down, like Jade.

Keyboard and switch versionCompatibility stated officially
K2 HE with Nebula V1Compatible with Gateron Double-Rail Magnetic; not compatible with Jade or KS-20
K2 HE with Nebula V2Also compatible with Keychron Ultra-Fast Lime
Q1 HE 8KCompatible with Keychron Lime and Gateron Jade
V6 Ultra Hybrid 8KLime included as standard. Lists Wooting, the Gateron KS-20 series, and Nebula V2 as examples of compatible switches with the north pole facing down

Source: K2 HE / Q1 HE 8K / V6 Ultra Hybrid 8K. These are the official listings as of November 16, 2026.

Looking at the evidence, it is no longer accurate to lump Keychron’s magnetic keyboards together as “incompatible with the Jade family.”

However, that does not mean that any switch will work as long as its magnet has the same polarity.

Care is needed when assessing switch compatibility, since both fit with the physical switch plate and firmware must be taken into account.

When replacing a switch, check compatibility for the specific model and version. For the Q1 HE 8K, also check the switch-type setting in Launcher, as Keychron recommends.

When Did Things Change?

I could not find an official announcement, so this account is limited to what can be observed.

For the Lime-equipped Q1 HE 8K, a review published on November 18, 2025, by Notebookcheck reported compatibility with magnetic switches from other manufacturers.

At the very least, this means that a product that allowed switch replacement existed by then.

The date on which Nebula’s polarity change can be confirmed is the July 27, 2026, announcement of V2 from Keychron Korea .

However, this date does not establish that shipments of all models in all regions switched over at once.

By contrast, the official FAQ for the Lime-equipped Lemokey L5 HE, updated on February 10, 2025, states that Jade is not supported.

The reason for the incompatibility is not given, so we cannot conclude that the original Lime’s polarity was the cause.

Based on the materials available, the sequence is that compatibility with third-party switches was first reported for a Lime-equipped keyboard, and the polarity change to Nebula itself was announced later.

Keychron’s Stated Principles and Changes to Its Magnetic Switches

Keychron’s official brand introduction says that, while selling products as a commercial company, it places importance on innovation through open source and the development of its community.

Making its QMK firmware public is another example of this.

That is why I have expectations for switch compatibility from Keychron, too.

Wouldn’t both expanding the parts that can be used with its own products and making it easier for other manufacturers and individuals to create products be meaningful efforts for the community?

Of course, open-sourcing software and aligning the magnetic polarity of switches are separate matters.

Still, in my mind, these things are connected: users being able to choose their own parts, and communities thriving through compatibility with other brands.

The support for third-party switches on Lime-equipped models that we confirmed, along with the polarity change in Nebula V2, at least looks like enough to suggest that Keychron made changes with the market in mind.

It is particularly significant that Keychron officially explained that the change to Nebula was made to improve compatibility.

G28PrTBboAAspLuKawamura

I wish this were posted on Keychron’s main site rather than its Korean site…
Maybe I just haven’t been able to find it.

This alone doesn’t tell us the intentions of the company as a whole, and limitations of the earlier products remain.

Even so, one major change confirmed by this research is that Keychron has been revisiting its established specifications to better fit the market, rather than simply sticking with them.

Why Brands Want to Create Proprietary Standards

As users, we’re naturally happier when more keyboards let us use the switches we like.

From a brand’s perspective, though, having a proprietary standard can be very meaningful.

If a brand can supply parts that work only with its own products, it can earn revenue not just from the devices themselves, but also from replacement parts and additional purchases.

This allows brands to keep users within their product ecosystem and retain that demand instead of handing it to competitors.

Proprietary standards offer these commercial advantages.

What’s more, if a key component designed by a brand becomes the market standard, other companies will start making products to match it.

That could give the brand control over the market, rather than simply letting it sell keyboards.

I think this competition is also part of why low-profile switch standards have been so slow to converge.

Alongside design considerations such as thinness and construction, we also need to consider the business goal of making a brand’s own standard more widespread.

That’s why I don’t simply think proprietary standards are bad and common standards are good.

I think their significance depends on how the technology is shared and who gets to use it.

I Hope to See the Changes in Magnetic Switches Extend to Low-Profile Switches

Keychron has expanded support for third-party magnetic switches on Lime-equipped models, and with Nebula V2 it has changed the polarity to match the orientation used by many products on the market.

In other words, there is precedent for Keychron revising specifications it has used in its own products to improve compatibility with the market.

Seeing this makes me hopeful about the new low-profile switches, too.

That means developing proprietary technology while also valuing compatibility with existing standards.

What’s more, if Keychron makes its designs and specifications available for other manufacturers and individuals to use, its technology could spread beyond brand boundaries.

Whether the new switch will be open-sourced is unclear at this point, but I really hope it will be.

This is simply my own selfish hope.

Looking at Japan, inconsistent spacebar standards have likewise made it difficult for a keycap-swapping culture to take root, and that remains an issue today—a lesson worth reflecting on.

That’s why JLA was created in a form people can support.

JLA is not a standardization body that unilaterally sets standards. It is an initiative that works with brands that share the belief in the value of greater compatibility and choose to support it.

The logic of competition is that one player gains influence in the market and others start aligning with it.

But while that competition plays out, users are the ones who face confusion and lose out.

Will the flexibility Keychron has shown with magnetic switches carry over to its low-profile switches?

Because Keychron values open source and community, I hope it will do more than strengthen its own products and move in a direction that allows other brands to participate as well.

  • First published:
  • Last updated:
  • Reporting method: Original reporting
  • Sources and references: See in the article
  • Conflict of interest: Products provided: None; monetized links in this article: Yes
Greenkeysの記事をGoogleで見つけやすく Find Greenkeys More Easily on Google

Google検索の「優先ソース」にGreenkeysを追加します

Add Greenkeys as a Preferred Source on Google

ブランド/企業のご担当者様へ:
製品設計やリリース前のフィードバックに関するご相談は
こちらからお進みいただけます。

For Brands and Manufacturers:
For product design consultation and pre-release feedback,
please contact GreenEchoes Studio.

Share me!
  • Copied the URL !

Avatar of Ryosuke Kawamura Ryosuke Kawamura Greenkeys Editor-in-Chief

Ryosuke Kawamura is the Editor-in-Chief of Greenkeys and the founder of GreenEchoes Studio.

He covers mechanical keyboards, custom keyboards, and input devices through reviews, interviews, hands-on testing, photography, and editorial work. He has reviewed more than 100 products and regularly reports on JIS-layout compatibility and trends in the Japanese keyboard market.

He also founded the Japan Layout Alliance (JLA), an industry collaboration initiative aimed at improving compatibility for Japanese-layout keyboards.

Greenkeys values editorial independence and transparency. Product samples, advertising relationships, and affiliate links are disclosed within each article.

Table of Contents