Position Statement: This article may contain affiliate links. Prices, availability, and specifications are based on publicly available information that could be verified at the time the article was published.
On March 30, 2026, NuPhy updated its official X to announce the release of Air65 v3 and Air100 v3 as previously announced.
One thing that was not predicted in advance was that the name and design was changed to Air100 instead of Air96.
Thus, the F line, the arrow key section, and the numeric keypad section have independent layouts, which improves touch typing accuracy.
What is even more noteworthy is that multilingual development, including Japanese-language sequences, is available.
However, this image shows that the Bottom Row is still in the English layout, and at this point, it is most likely in the rendering stage and cannot be said to be the official layout.
Greenkeys OfficeFor Japanese-language models, purchase from a Japanese distributor for peace of mind.
As for the Air series, as in the past, the 75% layout was released first, followed by other sizes a few months later, and this time around, we are following the same trend.
Finally this time, those who had been waiting for something other than 75% are now in a position to choose.
This article looks at the conditions for those who would find it worthwhile to replace their existing Air series.
Air v3 series, need to replace?
For those who have already switched at 75%, this is “series extension” news, and some of you may have already replaced them.
In this issue, those who have been using the Air65 / Air96 series will be “considering” replacing them.
Typical changes in the V3 generation include a gasket mount, aluminum frame, Gateron Low-profile 3.0, and a removable rotary encoder.
Air96 users should also look at changing the layout.
If you were concerned about any of the above changes, this is a good time to consider a replacement.
People who may fall into the category of timing for replacement.
- Not satisfied with keystroke feel
- Emphasis on appearance and texture
- I want to experience the evolution of the switch.
- I need an encoder knob.
1. those who want to switch because of the keystroke feel
On the official NuPhy product page, the AirV3 series is clearly listed as Mount Type: Gasket.
This is a very good reason to replace the V2 generation.
Low-profile keyboards have tended to be chosen for their thinness and portability, but with V3 we have changed the feel of the keystroke itself.
If you felt that the V2 was convenient but wanted a little more thickness in the typing feel, the V3 seems to be a pretty good match.
2. people who value appearance and texture
V3 is guided as Top Case: Aluminum / Bottom Case: ABS.
In other words, it is a configuration that aims to be one rank higher than conventional products, both in terms of appearance and rigidity when touched.
While the “lightness” of a low-profile keyboard tends to come first, a plastic body may not be enough if you are looking for a sense of ownership.
The V2 was useful, but it will stick quite well for those who wanted the quality and weight of aluminum.
3. people who want to try the evolution of the switch generation
The switch has been updated to AirV3 series Gateron Low-profile 3.0.
Red nano / Brown nano / Blush nano are lined up as options.
It is not simply a matter of a new model number, but rather a change in direction in which the company wants to create a proper key feel and stability even in low-profile models.
In particular, the Gateron LP3.0 is recommended for those who want the same stroke length in a low profile as in a normal profile.
4. people who want to use it with knobs
The V3 generation features a modular rotary encoder knob.
This is a fairly obvious difference that was not present in V2.
Many people find that having knobs for volume, zoom, scrolling, etc. changes the usability of the system, so choosing V3 because of the knobs is also a good choice.
Generation Comparison
| (data) item | Air V2 series | Air V3 series |
|---|---|---|
| mount(ing) system | existing structure | Gasket |
| switch generation | Gateron LP 2.0 series | Gateron Low-profile 3.0 |
| knob | nashi (Pyrus pyrifolia, esp. var. culta) | Detachable rotary encoder support |
| case (e.g. receptacle, condition, event, legal action, letter style, etc.) | existing configuration | Aluminum top case |
| connection | 2.4GHz / Bluetooth / Wired | 2.4GHz / Bluetooth 5.0 / USB-C |
| array expansion | ANSI | ANSI, JIS, etc. |
summary
The AirV3 series is finally all released.
- Gasket mount
- Aluminum top case
- Gateron LP 3.0
- detachable rotary encoder
- Improved battery area
If you find this area attractive, you may look at this “replacement” quite positively.
For those who have been waiting for their own layout instead of 75% , this V3 generation may be the real deal.
The official NuPhy store lists the Air V3 unit price as $129.95 and up.
On the product page $10 discount code “airv3” is also available on the product page and other accessories such as NuFolio, desk mats (+$29 each), and wrist rests ($19-$24). (discount ends April 30).
This is a great opportunity to consider.
Greenkeys operates solely on performance-based advertising and does not use Google ads because they reduce usability.
Please support us through Buy Me a Coffee if you enjoyed reading the article so that we can continue to operate the media.
