Image reference: https://takashicompany.booth.pm/items/6675825
On March 29, 2025, takashicompany began interest checks on the new “Palmslave”.
「出かけた先で文字を打つのを楽しくする」分割型の狭ピッチキーボード #Palmslave のBoothを開きました。購入を検討・希望されている方は「入荷お知らせメールを受け取る」を押してください🙏 在庫数の参考にします!https://t.co/m2wTDfumUg #自作キーボード #キーケット #狭ピッチキーボード協会
— takashicompany (@takashicompany) March 28, 2025
This time, it is a “simple IC” method, whereby the estimated production is ascertained according to the number of arrival notification e-mails received from the “Receive arrival notification e-mails” button on the same page of the Booth Shop.

The product lineup is as follows
Palmslave Product Lineup
- Basic kit – 15,000 yen (tax included)
- 3D printed case black (with carabiner hole) – 10,000 yen (tax included)
- 3D printed case black (without carabiner hole) – 10,000 yen (tax included)
- Assorted homemade 0.8u 3D printed keycaps (black, 15.5mm width, approx. 40 pieces) – 5,000 yen (tax included)
Basic kit contents can be found here.
基本キットに関しては、ケースとキーキャップが含まれていません。
Therefore, you must obtain a case from one of the following
- Order by yourself using the case data that can be downloaded when purchasing the basic kit (order from JLC3DP,DMM.make, etc. )
- Order from Yusha Kobo (acrylic case)
- Buy 3D printed cases
- Make it yourself (with spirit)
As for keycaps, special keycaps for 16mm pitch (about 15.5mm on one side) are required.
You will need to download the keycap data, which will be released free of charge at a later date, and print it yourself, or purchase an assortment of homemade 0.8u 3D printed keycaps.
As for Palmslave, it was a very popular product in the earlier Kequet 2025.
The 16mm pitch (approx. 0.8u) makes it more compact than normal key pitch (1u=19.05mm).

If you want to get one, why not sign up for our arrival notification email?
Information reference: takashicompany
